3.2.3. Kernel Drivers

• 3.2.3.1. ADC
• 3.2.3.2. Crypto
  • 3.2.3.2.1. Introduction
  • 3.2.3.2.2. Building the Drivers
  • 3.2.3.2.3. Using Cryptographic Hardware Accelerators from OpenSSL
  • 3.2.3.2.4. Using the TRNG Hardware Accelerator
  • 3.2.3.2.5. Hardware Accelerator testing
    • 3.2.3.2.5.1. Testing using the tcrypt module
    • 3.2.3.2.5.2. IPSec Testing
• 3.2.3.3. MCAN
• 3.2.3.4. GPIO
• 3.2.3.5. I2C
• 3.2.3.6. CPSW2g Ethernet
  • 3.2.3.6.1. Introduction
    • 3.2.3.6.1.1. Supported platforms
  • 3.2.3.6.2. Driver Configuration
  • 3.2.3.6.3. Device tree bindings
  • 3.2.3.6.4. MAC mode
    • 3.2.3.6.4.1. Interrupt pacing
    • 3.2.3.6.4.2. Errata: i2329 MDIO interface corruption (CPSW and PRUSS)
      • 3.2.3.6.4.2.1. Description
      • 3.2.3.6.4.2.2. Workaround for TI SDK Version > 8.4
• 3.2.3.7. PCIe End Point
• 3.2.3.8. PCIe Root Complex
• 3.2.3.9. OSPI/QSPI NOR/NAND
• 3.2.3.10. SPI
• 3.2.3.11. NAND
• 3.2.3.12. MMCSD
  • 3.2.3.12.1. Introduction
  • 3.2.3.12.2. References
  • 3.2.3.12.3. Features
  • 3.2.3.12.4. Supported ultra high speed (UHS) modes
  • 3.2.3.12.5. Driver configuration
  • 3.2.3.12.6. MMC support in Linux
  • 3.2.3.12.7. Steps for working around SD card issues in Linux
  • 3.2.3.12.8. Listing MMC devices from Linux
  • 3.2.3.12.9. Create partitions in eMMC UDA
    • 3.2.3.12.9.1. Create “boot” partition
    • 3.2.3.12.9.2. Create “root” partition
  • 3.2.3.12.10. Formatting eMMC partitions from Linux
    • 3.2.3.12.10.1. Format to vfat
    • 3.2.3.12.10.2. Format to ext4
  • 3.2.3.12.11. Flash eMMC for MMCSD boot
    • 3.2.3.12.11.1. Flash to eMMC “boot” partition
    • 3.2.3.12.11.2. Flash to eMMC “root” partition
• 3.2.3.13. UART
  • 3.2.3.13.1. Introduction
  • 3.2.3.13.2. Driver Features
  • 3.2.3.13.3. Basic External loopback testing
• 3.2.3.14. UBIFS
• 3.2.3.15. USB
  • 3.2.3.15.1. Introduction
  • 3.2.3.15.2. TI SoC Integration
  • 3.2.3.15.3. EVM